Yes, if the gap is a true 5–6 in (13–15 cm) slot. I sell this cart at OkaNest, and it's built exactly for those dead narrow spaces — between the fridge and wall, beside the washer, or next to the counter. The cart itself has a narrow 6.3–8.7 in (16–22 cm) footprint, so the gap needs to clear the cart body plus a little wiggle room for the wheels.
can i fit one beside my fridge in a rental kitchen without drilling anything?
Rental kitchens are where this question comes up most. You can't drill, you can't mount, and the gap beside the fridge just collects dust. Here's how I'd approach it:
- Measure the gap at its narrowest point, not at the top. Baseboards, door trim, and the fridge's hinge side often steal half an inch.
- Pick your variant width against that number. The cart comes in 6.3 in (16 cm), 7.1 in (18 cm), 7.9 in (20 cm), and 8.7 in (22 cm) footprints. If your gap is 7 in, the 6.3 in variant leaves you about 0.7 in of play.
- Check the fridge door swing. A cart that fits the gap can still block the door if it sits proud of the fridge front. Slide it back so the cart face sits flush or slightly behind.
- Choose your tier count by height, not width. The 3/4/5-tier builds share the same slim footprint, so a 5-tier fits the same slot as a 3-tier — it just uses more vertical space.
- Lock the wheels once it's in place. The wheels are lockable, which matters in a rental because nothing is screwed down. A locked cart won't roll out when you pull the fridge door.
No drilling, no wall anchors, no landlord conversation. The carbon-steel frame does the work.
3-tier or 5-tier — which one should i get for a small bathroom?
Honest answer: it depends on what you're storing and how tall your clearance is.
Go 3-tier if: you're storing taller items like shampoo bottles, cleaning spray, or a folded towel stack, and you want to reach the top without a step. Fewer shelves means more headroom per shelf. It's also the lighter lift if you'll move it between rooms.
Go 5-tier if: your items are short and flat — bar soap, washcloths, hair ties, small bottles — and your vertical space is generous. You get roughly the same floor footprint as the 3-tier but more usable surface area. In a bathroom with a tall gap beside the vanity, the 5-tier wins on pure capacity.
Go 4-tier if: you're genuinely in between. It's the middle build, and I recommend it when someone tells me they want "a bit more than three shelves but the top shelf still has to be reachable."
One thing that doesn't change between them: the carbon-steel frame and the lockable wheels. All builds come in Black or White, so matching your bathroom fixtures is a color choice, not a structural one.
If your gap is closer to 5 in than 6 in, size down rather than up. A cart that scrapes both sides is worse than one with a finger-width of clearance.
Quick takeaways
- Measure the gap at its narrowest point — baseboards and hinges eat width. The cart footprint runs 6.3–8.7 in (16–22 cm).
- 3/4/5-tier builds share the same slim footprint, so pick tiers by height and item size, not by gap width.
- Lockable wheels mean no drilling in rentals, but slide the cart behind the fridge door's swing before you load it.
Q: will a slim rolling cart fit a 5-inch gap?
A: It's built for dead narrow slots about 5–6 in (13–15 cm) wide. The cart body has a 6.3–8.7 in (16–22 cm) footprint, so a true 5-inch gap needs the narrowest 6.3 in variant and a careful measurement at the tightest point.
Q: can i fit one beside my fridge in a rental kitchen without drilling anything?
A: Yes — the cart is freestanding on lockable wheels, so there's nothing to mount or drill. Measure the gap at its narrowest spot, pick the variant that clears it, and slide the cart back so it sits flush with the fridge front.
Q: 3-tier or 5-tier — which one should i get for a small bathroom?
A: Pick 3-tier for taller bottles and easy top-shelf reach, 5-tier for short flat items when vertical space is generous. Both share the same slim footprint and carbon-steel frame in Black or White.