Adhesive wall bottle holder on grey bathroom tile holding a white pump bottle

Adhesive Wall Bottle Holder, No-Drill, Fits 1.4 in Necks

1 Pack
$22.99
Zu Produktinformationen springen
Adhesive wall bottle holder on grey bathroom tile holding a white pump bottle
  • Adhesive wall bottle holder on grey bathroom tile holding a white pump bottle
  • Four adhesive wall bottle holders in a row on a pale wall, each holding a different bottle
  • Close-up of the empty bottle holder showing the round opening, the sliding clip and the front tabs
  • Size guide for the adhesive wall bottle holder showing the neck opening and pack size in inches
  • The bottle holder carrying bottles of different sizes to show the clip takes different necks
  • Macro of the matte gunmetal aluminium tray, the slot and the metal edge of the round opening
  • Fits and not-for guide for the adhesive wall bottle holder
  • Side view of the bottle holder on a pale wall with a bottle hanging clear of the surface
  • One bottle holder beside a row of four, all empty, on a plain pale background
  • Adhesive Wall Bottle Holder, No-Drill, Fits 1.4 in Necks
  • Adhesive wall bottle holder on grey bathroom tile holding a white pump bottle
  • Four adhesive wall bottle holders in a row on a pale wall, each holding a different bottle
  • Close-up of the empty bottle holder showing the round opening, the sliding clip and the front tabs
  • Size guide for the adhesive wall bottle holder showing the neck opening and pack size in inches
  • The bottle holder carrying bottles of different sizes to show the clip takes different necks
  • Macro of the matte gunmetal aluminium tray, the slot and the metal edge of the round opening
  • Fits and not-for guide for the adhesive wall bottle holder
  • Side view of the bottle holder on a pale wall with a bottle hanging clear of the surface
  • One bottle holder beside a row of four, all empty, on a plain pale background
  • Adhesive Wall Bottle Holder, No-Drill, Fits 1.4 in Necks

Product Demo

Adhesive Wall Bottle Holder, No-Drill, Fits 1.4 in Necks

Adhesive Wall Bottle Holder, No-Drill, Fits 1.4 in Necks

$22.99
Pack

Fits if: bottle necks up to 1.4 in across. The neck drops through the round opening in the tray and the shoulder of the bottle rests on top. A clip sits in the slot beside that opening and slides in and out, which is how the maker gets one holder to take different neck sizes instead of just one. Shampoo, body wash, hand soap and dish soap are all in range

Not for: wide-mouth or flared bottles - the clip needs a neck to close on. Not for textured, bumpy, flaking or damp walls; the pad needs a flat clean dry face. Not for hanging towels or anything else with weight, it is a bottle holder. The maker publishes no load rating for this product, so we do not quote one

Size: 3.7 x 2.8 x 2.4 in as the maker packs a single holder (9.5 x 7.0 x 6.0 cm). That is their shipping size and the only size they publish - the holder itself is smaller than its pack. The round opening a bottle neck drops through is 1.4 in (35 mm), printed on their spec image

Load: holds 1 bottle per holder, hung by the neck

The bottle ends up on the floor. Every shower.

You know the shelf. It is barely wider than your hand and it already has four bottles fighting for space. So the shampoo goes down on the shower floor, and every day someone kicks it across the tiles.

This is a small bracket that sticks to the wall and gets the bottle off the floor. Press the adhesive pad on, let it cure, and the bottle hangs there instead.

How the bottle actually stays up

The tray has a round opening in the middle. The neck of your bottle drops through it and the shoulder of the bottle sits on the tray. Two small tabs at the front stop it tipping forward.

Alongside the opening there is a slot with a thin clip in it. Slide the clip in or out and the opening changes size. That is the maker's answer to the fact that nobody's shampoo bottle has the same neck as the last one. Their own callout on the spec image gives the round opening as 1.4 in, and their artwork says one holder takes different neck sizes.

How it attaches

An adhesive pad. No drill, no screws, no hole to explain to a landlord. Worth saying plainly: this needs a flat, smooth, clean, dry surface. Glazed tile is ideal. Bumpy paint and flaking plaster are not, and on a damp wall the pad will not hold.

The maker lists the body as aluminium alloy in a matte gunmetal finish. Adhesive is the only fixing, so treat this as a bottle holder and not a shelf.

One, or a whole row

Buy one, two or four. The people who buy four are usually lining them up over a kitchen sink - soap, dish soap, hand wash, lotion - which is one of the photos we shot. One is plenty for a shower.

What you get: the holder, in the pack size you pick. Bottles are not included.

Das könnte Ihnen auch gefallen

  • 5 stars: 10 (63%)
  • 4 stars: 4 (25%)
  • 3 stars: 2 (13%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
O
Owen D.
Good holder, limited bottle fit

It does hold the bottle off the floor like I wanted and the adhesive is strong on clean tile. The downside is only certain necks work, and two of my five bottles were too wide to seat right. If your bottle necks vary a lot, check the 1.4 in spec first.

B
Beth C.
Fine once I found the right wall

Took me two tries. My shower has one smooth tile section and one bumpy painted section and the first spot failed. Once I moved it to the smooth tile it held fine with a full bottle. Fair product, but the surface requirement is stricter than the photos make it look.

G
Grant W.
Small and it does one job

It holds my shampoo and nothing else, which is exactly what it says. I would not hang a towel or a razor on it. Installation was quick and it looks tidy. Only note is the single pack feels a little pricey for one bracket, but it solved my problem.

L
Lena A.
Neck measured bigger than listed

My favorite body wash has a neck that came out around 1.5 in so it did not drop through as cleanly as I hoped. It still sits and holds, just not as snug. My other bottles fit perfectly. Measure your actual bottle neck before ordering, do not assume.

M
Marcus O.
Great for smooth tile only

Put one in the shower on glazed tile and it is rock solid. Tried the second one on the painted wall by the vanity and it peeled within a day because the paint is slightly textured. Not the product's fault exactly, the listing does say smooth and flat. Just know your wall before you buy.

D
Deborah L.
Works, but prep is everything

First attempt I stuck it on a spot that felt dry but was right under the showerhead and it slid down overnight. Moved it to the dry end of the wall, cleaned the tile properly, and it has been solid for a month. So read the surface requirements and it is fine. Just do not rush the cure time.

J
Jared F.
Sink organizer for a tiny rental

My kitchen has basically no counter and the dish soap was always in the way. This got it up on the wall next to the sink and freed up real space. For 23 bucks the single pack did exactly what I needed without drilling into the landlord's tile.

R
Renee P.
Held up through six weeks of steam

I was skeptical about adhesive in a shower that gets steamy every morning. Six weeks later it is still up with a heavy 28 oz bottle. The matte finish has not spotted or discolored either. I did make sure the tile was bone dry before sticking it.

T
Tom H.
Two pack, one each bathroom

Got the two pack so the kids stop fighting over the one shelf in the hall bath. The body wash hangs on the wall now and the floor stays clear. Installation was genuinely under two minutes each. No screws, no drill, no drama.

A
Angela V.
Clip actually adjusts for real bottles

My conditioner has a weird wide neck and my shampoo is skinny and I figured one of them would not fit. Slid the little clip out for the conditioner and in for the shampoo and both hang fine. That adjustable slot is the whole reason I bought this over the fixed ones I saw.

C
Corey M.
Matte finish matches the fixtures

I was worried the gunmetal would look cheap or shiny next to my brushed nickel but the matte is actually a close match. It reads as a small dark bracket, nothing flashy. Put it in the shower about a foot above the old shelf and it looks intentional.

S
Sandra K.
Bought a second one immediately

Put the first one in the guest bath for the shampoo and it worked so well I ordered another for our shower the same week. The aluminium feels sturdier than I expected for something that just sticks on. It is a bottle holder, not a shelf, so I would not pile anything on top of it.

K
Ken B.
Rental friendly and it holds

Landlord would charge me to patch holes so I wanted zero drilling. Wiped the tile with rubbing alcohol, let it dry, pressed the pad down hard for thirty seconds. Three weeks in with a full 24 oz body wash and it has not budged. I check it every few days out of habit and it is solid.

P
Priya N.
Four across the kitchen sink

I got the 4 pack and lined them up on the backsplash above the sink. Dish soap, hand wash, lotion, and a spray bottle that I actually leave out now instead of digging under the cabinet. It decluttered the counter more than I expected. The gunmetal color looks close to my faucet which was a nice surprise.

D
Dale R.
Measured my neck at 1.38 in

I actually took a tape measure to my dish soap before ordering because I have been burned before. Neck came out right at 1.38 in and the round opening swallowed it with a hair of room. The clip slot makes the difference because my hand soap bottle is fatter at the neck than the dish soap. Both sit in it fine.

M
Marissa T.
Finally off the shower floor

My husband kept knocking the shampoo bottle off the little corner shelf and it would land on his foot. I stuck one of these at chest height on the back wall and now the big 33 oz bottle just hangs there. The little tabs keep it from tipping when the water hits it. Took me about a minute to press it on and I waited a day before loading it.