Under-Cabinet Tissue and Roll Holder, No-Drill, 9.5 in

Bought it in early spring and it's been in our upstairs bathroom through the sticky months. No sag, no rust, and the roll still spins like day one. I checked the underside with a level before sticking it and I think that prep is why it's held so well.

It's a solid little holder and the steel feels durable. My problem is the lip along the bottom of the tissue opening is shallow, so a lighter box can slide forward a bit when you pull a tissue. I wedged a folded napkin behind the box to snug it up. Works now, but I shouldn't have to rig it.

Nice that one piece holds the roll and the tissue box instead of two separate mounts. My gripe is the bar is on one side only, so under a narrow cabinet it may not line up where you want it. Not a dealbreaker, just plan your placement before peeling the backing.

I went back and forth between the two finishes and picked warm white for our cream cabinets. It reads almost like part of the cabinet, not an add on. My husband had it stuck up in under five minutes, no tools at all.

Their own note says hand measuring can be off by half an inch and mine was right at 9.6 inches, so basically on spec. It fit my cabinet with maybe a quarter inch of clearance on each side. Docking one star only because the tissue opening is a hair narrow for the thicker boutique boxes.

The holder itself is well made and does both jobs as described. My issue is the adhesive, it let go after about ten days on a cabinet underside that I thought was clean. I pressed it back on and it's held since, but I keep an eye on it now. Not angry, just be aware.

Mounted it under the shelf above the microwave, which is where the tissue box used to live anyway. Now I can grab a tissue without standing up. The whole unit is about 9.5 inches so it fit between the shelf brackets with room to spare.

I expected something thin at this price but the body is solid steel and the bar is aluminum, which I confirmed by tapping both. Four weeks in with daily use and the adhesive hasn't budged even in a humid bathroom. No rust spots so far.

Works well for a regular roll of paper towels, but the jumbo rolls from the warehouse store are too fat to spin freely, they drag on the bracket. Regular rolls are perfect. The tissue slot in front is sized right for a standard box.

Small kitchen, every inch counts. This cleared the spot where the roll and the tissue box both used to sit, and now that area holds my cutting board. The bar is long enough that the roll doesn't rub the cabinet door when it turns.

I rent and my lease is strict about holes in cabinets, so adhesive was the whole point here. It went up under the cabinet over the coffee station and holds a roll plus a tissue box without sagging. When I move out I'll just peel it off.

Liked the first one so much in the kitchen that I ordered another in warm white for the bathroom cabinet. The white is a soft off white, not stark, and it blends with our painted cabinets. Same easy stick on both.

Ordered the gunmetal to go under the cabinet next to the stainless fridge and it basically vanishes against it. The powder coat has a slight texture but nothing that looks cheap. Roll spins smooth, no squeaking.

I read the note about checking the underside before ordering and I'm glad I did, because my first cabinet choice had a lip that would have blocked the adhesive rail. Moved to the next cabinet over and it went on flat. Holding solid after three weeks with a full roll and a box of tissues.

I put this inside the bathroom mirror cabinet since I was tired of the tissue box eating counter space next to the sink. The box slides into the front slot and the little lip keeps it from wandering. The roll bar on the side holds a standard roll fine, though a mega roll is a tight squeeze.

Our paper towels used to sit right next to the faucet and the bottom roll was always wet. I stuck this under the upper cabinet above the counter and now the roll hangs free and dry. Took maybe two minutes to install after I wiped the underside down with alcohol.