Wall Mounted Microwave Bracket, Folding Arms, Frees the Counter
Brushed 304
$39.99
Ga direct naar de productinformatie
Product Demo
Wall Mounted Microwave Bracket, Folding Arms, Frees the Counter
$39.99
Fits if: countertop microwaves up to 15.7 in (400 mm) deep. Also small ovens, air fryers and coffee machines that fit that depth. Plate needs a flat wall area at least 7.9 in tall per bracket.
Not for: microwaves deeper than 15.7 in; over-the-range setups above a cooktop; tile, plaster or drywall that cannot take screws and anchors; mounting on a cabinet side thinner than the screws can bite.
Size: wall plate 7.9 in (200 mm) tall. Arms slide from 8.7 in to 15.7 in (220-400 mm) deep and lock with the collar bolt. One pair weighs 1.9 lb (860 g).
Where the microwave goes when the counter is already full
I set this pair up in a kitchen where the only free counter run was about a foot wide. The microwave took all of it. Nothing else fit, not a cutting board.
These two brackets put the microwave on the wall instead. Four screws, two plates, arms that slide out until the microwave front clears the counter edge. The counter underneath comes back.
The arms run from 8.7 in to 15.7 in deep, so a shallow 0.7 cu ft unit and a deeper 1.2 cu ft one both sit level. Once you have the depth right, the collar bolt locks the arm where you set it.
Steel is SUS304, stamped right on the plate. I checked the stamp with a magnet and a close-up - it is the real thing, not a 201 plate with a 304 sticker.
Each bracket has a hook under the arm. Spatula, tongs, a towel - they hang there instead of lying on the counter.
One thing to measure before you drill: the depth of your microwave. Over 15.7 in and these are the wrong brackets.
What you get: one pair of brackets, screws and wall anchors, two hooks. Pick brushed steel or black.